FAQ
What is the default username and password for the QNAP NVR?
admin and admin
What tool do I use to detect the IP address of Mobotix cameras on a network with a DHCP server?
A – There are three software programs that can be used
MxEasy can be downloaded from https://www.mobotix.com/eng_GB/Support/Software-Downloads?tab=180771#ta…
MXCC can be downloaded from https://www.mobotix.com/eng_GB/Support/Software-Downloads?tab=180775#ta…
MXMC can be downloaded from https://www.mobotix.com/eng_GB/Support/Software-Downloads?tab=326309#ta…
What is the default username and password for Mobotix cameras?
admin and meinsm
What is the default username and password for Avigilon cameras?
There are 2
i.) For the older H3 series of cameras it is admin and admin
ii.) For the new H4 cameras it is administrator with no password (in other words leave the password field blank)
What tool do I use to detect the IP address of Avigilon cameras on a network with a DHCP server?
A – The Avigilon Camera Installation tool can be downloaded from ftp://ftp.avigilon.com/CCT/AvigilonCameraConfigurationTool-1.2.0.2.exe
What is the default IP address for Avigilon cameras if there is no DHCP server?
169.254.x.x (where x can be anything between 0 and 255)
admin and 123456
The ACTi tool is called the IP Utility and can be downloaded from http://download.acti.com?id=15204 (you will have to create a logon username and password if you do not have one already)
192.168.0.100
What is the default username and password for Axis cameras?
There are 2:- i.) root and pass (most commonly used password) ii.) root and root
What tool do I use to detect the IP address of Axis cameras on a network with a DHCP server?
There are a few different tools but the easiest one to use is the Axis IP utility and can
What is the default IP address for Axis cameras if there is no DHCP server?
192.168.0.90
What is the warranty on my Edgecore switch?
If you buy an Edgecore product today, it’s in warranty until Edgecore stop producing that model – that could be for a number of years. Once that particular model becomes ‘end of life’, the warranty cover continues for a further two years. Once you’ve had a call with our technical support team, if the product is found to be faulty we will send you a replacement unit for delivery next working day - before you return the original unit to us. Mayflex will arrange with you to collect the faulty unit.
Do I have to configure the Poe function to work on the switch when I plug in my devices?
No, the PoE function is auto negotiate - the switch will detect if the device plugged in will need power or not and apply accordingly.
How many SFP ports does the GEP-2450 switch have?
4 SFP ports shared with copper ports 21-24
What is the application speed for the Level One GEP-2450 switch?
Gigabit Ethernet 10/1000
What is the PoE power budget of the GEP-2450 switch?
Per Port = up 10 30 watts so PoE +
Total PoE power budget across all ports = 185 watts
My Level One GEP-2450 switch keeps showing a red led status light on the front of the switch - Is the switch faulty?
No, the switch is not faulty. The red light does not affect the performance of the switch.
Please go to the following link on the Level One website and upgrade the firmware on the switch. This upgrade will change the parameters within the switch and stop the red light from illuminating
http://download.level1.com/level1/firmware/GEP-2450(1.53_HW-2)_2016-02-…
How do you perform a factory reset on a Level One GEP-2450 switch to clear all configuration?
Power down the switch.
Press the 'mode' button on the front of the switch.
Power up the device whilst still pressing the 'mode' button.
Keep the 'mode' button pressed for 20-30 seconds.
Release the button and wait for the switch to reboot.
What is the default IP address of the L1 switches?
IP = 192.168.1.1
Subnet Mask = 255.255.255.0
Default Gateway = 192.168.1.254