Network Service Assistant specification.
- Lithium Ion
- 3.7v
- 13,200 mah
- Approximate Test time : 8hrs (based on 200 tests per day)
- Charging time : 7hrs
- Linux
- TestDataPro PC Based Software
- TestDataPro Cloud
- AD-NETCABLE Test Adapter
- Network Connectivity Testing
- PoE load testing
- 2.5G / 5G / 10G Multi-Gig Link speed testing
- CAT3 – CAT6A Channel
- Integrated RJ-45 side port
- 10 / 100 / 1G BASE-T testing
- USB flash type A
- Micro USB
- USB cable
- 60-pin high-frequency connector
- Rated for 5000 insertion cycles
- Hot swappable
- 5V, 3A (supplied)
- 5-12V (supported)
- 2.1mm DC Jack
| AD-OTDR-MM | AD-OTDR-SM | |
|---|---|---|
| Wavelengths | 850nm +/- 10nm 1300nm +35/-15nm | 1310 +/- 25 nm 1550 +/- 30 nm |
| Compatible Fiber type | 50/125 µm, 62.5/125 µm for multimode | Single mode |
| Event Dead Zone | 2.5m typical for 850 nm, 4.5m typical for 1300 nm | 0.6m typical for 1310 nm, 0.6m typical for 1550nm |
| Attenuation Dead Zone | 2.5m typical for 850 nm, 4.5m typical for 1300 nm | 3.6m typical for 1310 nm, 3.7m typical for 1550nm |
| Dynamic Range | 25dB for 850nm, 27dB for 1300nm | 29dB for 1310nm, 27dB for 1550nm |
| Max Distance Range Setting | 40 km | 130 km |
| Distance Measurement Range | 9km for 850nm, 35km for 1300nm | 80km for 1310nm, 130km for 1550nm |
| Reflectance Range | -14 dB to -57 dB for 850nm, -14 dB to -62 dB for 1300nm | -14 dB to -65 dB for 1310nm, -14 dB to-65 dB for 1550nm |
| Pulse Width | 3, 5,10, 15,…,24995, 25000 nsec | 3, 5,10, 15,…,24995, 25000 nsec |
The test platforms carry a 2-year standard warranty for manufacturing defects. Extended Care is available in 1 and 3 year programs and runs coincident with the standard warranty, to cover equipment damage outside the standard warranty, such as excessive drop damage, shattered display, water damage, etc. Extended Care also provides free adapter replacement if damaged once a year for each year of Extended Care. Contact us to find out more about it.
The K30E supports Certi-Lite standards based single-ended cable test, PoE load testing for 802.3 af/at/bt, UPoE, SNR based Multi-Gigabit link speed testing up to 10GigE, Network Connectivity and Wireless Connectivity testing.
Standard Components Included in All NSA Kits:
- AD-NSA Test Adapter – Supports Certi-Lite, Multi-Gig, PoE, Network Testing
- NSA Remote ID#1
- CAT6A RJ-45 Coupler
- Carrying Case
- Wiring Rack Hanging Strap
- USB Flash Drive with Documentation and TestDataPro software access
- Quick Start Guide
- USB Cable
The K31E supports Certi-Lite standards based single-ended cable test, PoE load testing for 802.3 af/at/bt, UPoE, SNR based Multi-Gigabit link speed testing up to 10GigE, Loopback Fibre Optic Testing for both Singlemode and Multimode, Fibre Inspection Probe, Network Connectivity and Wireless Connectivity testing. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi dual band USB Adaptor.
Kit Contains all Standard Components Plus:
- Link Identifier Kit includes 50Hz or 60Hz Noise Filter Tone Probe
- AD-NSA-SM-01
- AD-NSA-MM-01
- PROBE-FIBER-INSP
- Interface adaptors, Loopback adaptors and test reference cords for testing SC. Kit now supports both SC and LC testing out of the box (extra interface adaptors and cords not pictured)
- Large Carry Case
The K60E-50Hz supports Certi-Lite standards based single-ended cable test, PoE load testing for 802.3 af/at/bt, UPoE, SNR based Multi-Gigabit link speed testing up to 10GigE, Network Connectivity and Wireless Connectivity testing. This kit also includes the Link Identifier Kit with ID numbers #2-#8, and the Tempo brand 50Hz Noise Filtering Tone Probe. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi dual band USB Adaptor.
Kit Contains all Standard Components Plus:
- Link Identifier Kit including a 50Hz or 60Hz Noise Filtering Tone Probe
- Large Carry Case
The K61E-50Hz supports Certi-Lite standards based single-ended cable test, PoE load testing for 802.3 af/at/bt, UPoE, SNR based Multi-Gigabit link speed testing up to 10GigE, Loopback Fibre Optic Testing for both Singlemode and Multimode, Fibre Inspection Probe, Network Connectivity and Wireless Connectivity testing. This kit also includes the Link Identifier Kit with ID numbers #2-#8, and the Tempo brand 50Hz Noise Filtering Tone Probe. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi dual band USB Adaptor.
Kit Contains all Standard Components Plus:
- Link Identifier Kit includes 50Hz or 60Hz Noise Filter Tone Probe
- AD-NSA-SM-01
- AD-NSA-MM-01
- PROBE-FIBER-INSP
- Interface adaptors, Loopback adaptors and test reference cords for testing SC. Kit now supports both SC and LC testing out of the box (extra interface adaptors and cords not pictured)
- Large Carry Case
Multimode OTDR Test Adapter for use with TestPro CV-100 or Network Service Assistant.
Kit contains:
- AD-OTDR-MM
- All required reference cords, interface adapters and launch cables, and cleaners
Singlemode OTDR Test Adapter for use with TestPro CV-100 or Network Service Assistant.
Kit contains:
- AD-OTDR-SM
- All required reference cords, interface adapters and launch cables, and cleaners
