TestPro is a purpose-built tester designed to ensure the modern Smart Building network infrastructure is fully qualified to support the demands of IoT connected devices.
The Testpro CV-100 is a cutting-edge cable certifier that will cater to all your cable certification needs and is the fastest tester currently available, saving you precious time on site. It not only certifies cables but also supports modern smart building network infrastructure and is fully equipped to handle the demands of IoT-connected devices. This versatile platform is a one-stop shop for all your cable testing and certification needs.
TestPro CV100 has a sophisticated RF measurement engine, able to support up to 3GHz frequency range. TestPro supports all mode combination parameters (including TCL), and exceeds the level 2G accuracy specifications for copper certification testing.
TestPro supports testing of SPE cable with hot swappable test adapters.
TestPro’s fibre optic measurements provide Tier-1 certification per industry standards as well as customisable limits for both Multimode and Singlemode Fibre Optic premise cabling. Additionally, these adapters include an integrated VFL to provide a quick indication of a break in the wire, as well as an integrated connection port for measuring electrical voltage for hybrid powered fibre applications in support of smart building initiatives.
TestPro is proud to announce the availability of OTDR testing for Tier 2 fibre optic testing. With the inclusion of AEM Fibre kits equipped with OTDR technology, you can now conduct thorough testing that fulfils the Tier 1 and Tier 2 certification requirements. Experience the unmatched precision and efficiency of OTDR testing as you uncover concealed faults and precisely locate issues on fibre optic cables.
Dirty connectors are most common cause for fibre optic link underperformance. The fibre inspection feature of TestPro allows you to check the cleanliness of fibre end faces in both installation and troubleshooting environments.
The TestPro 100 comes with optional detachable adapters that enable a wide variety of test functions to cater to the needs of today’s network infrastructures, as well as to easily scale to cater for future requirements.
Autotest is the easiest way to ensure that cabling links will support the desired network rate. It is also fast at 6 seconds including all optional test parameters such as TCL, ELTCL, DC Resistance Unbalance, and more.
The AD-NET-CABLE adapter provides comprehensive testing for verifying PoE deployments. It supports all PoE standards including 802.3 af/at/bt and UPOE for reporting of PSE configuration and snf full load testing with reporting of Current/Wattage/Voltage. In addition, it also allows for sustained loading of the PoE source over longer periods to identify hard to find intermittent power drops, through external loads.
TestPro is capable of validating a link to ensure Ethernet can be supported at 1/2/5/5/10GBASE-T. It can perform SNR measurements while under traffic and PoE load, ensuring confidence that a cabling link will support the desired network rate.
TestPro can connect to a live Ethernet network through the 10/100/1000 network interface connector, or via WiFi (Edimax EW-7822ULC Wi-Fi USB adapter required). Once connected, TestPro will auto-discover connected devices on the network. You can Ping any other device to verify connectivity with traceroute and measure latency.
TestPro can auto-discover all 2.4GHz and 5GHz Wi-Fi SSIDs and their associated RSSI values (received power level). This is helpful in discovering Wi-Fi “dead zones” and checking Wi-Fi connectivity with optional Edimax EW-7822ULC Wi-Fi USB Adapter.
All TestPro CV100’s come with a full 3-year warranty from date of purchase – double what competitors offer and proof of our confidence in the quality and reliability of our instruments.
The K50E kit provides copper certification. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adaptor.
Test Adaptors Supplied as standard:
- Set of AD-CAT8.1-CH Channel Adaptors
- Set of AD-CAT8.1-PL Permanent Link Adaptors
The K51E kit provides both copper and fibre Optic certification. Wireless testing is supported and requires an additional Edimax EW-7822ULC Wi-Fi USB Adaptor.
Test Adaptors Supplied in addition to the K50E:
- Set of AD-SM-01E SingleMode Fibre Optic Adaptors
- Set of AD-MM-01E MultiMode Fibre Optic Adaptors
- PROBE-FIBER-INSP (not pictured)
- Interface adaptors and test reference cords to add SC testing. Kit now supports both SC and LC testing out of the box (extra interface adaptors and cords not pictured)
The K60E combines both copper cable certification and network connectivity testing. This kit provides Copper certification, PoE load testing and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adaptor.
Test Adaptors Supplied in addition to the K50E:
- Set of AD-NET-CABLE Adaptors for PoE and Multi-Gigabit
- AD-6A-PCORD (supports MPTL testing, not pictured)
The K61E combines both copper and fibre cable certification and network connectivity testing. It provides, PoE load testing and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adaptor.
Test Adaptors Supplied in addition to the K50E:
- Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
- Set of AD-SM-01E SingleMode Fibre Optic Adapters
- Set of AD-MM-01E MultiMode Fibre Optic Adapters
- AD-6A-PCORD (supports MPTL testing, not pictured)
- PROBE-FIBER-INSP (not pictured)
- Interface adaptors and test reference cords to add SC testing. Kit now supports both SC and LC testing out of the box (extra interface adaptors and cords not pictured)
The K21E-MM is used by Cable Contractors. This kit provides Multimode OTDR Fiber Optic testing. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.
Test Adapters Added with Standard Components:
- D-OTDR-MM
- All required reference cords, interface adapters and launch cables
- Hard case to keep your test equipment safe and secure
The K21E-SM is used by Cable Contractors. This kit provides Singlemode OTDR Fiber Optic testing. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.
Test Adapters Added with Standard Components:
- AD-OTDR-SM
- All required reference cords, interface adapters and launch cables
- Hard case to keep your test equipment safe and secure
The K21E-QD is used by Cable Contractors. This kit provides Singlemode and Multimode OTDR Fiber Optic testing. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.
Test Adapters Added with Standard Components:
- AD-OTDR-SM
- AD-OTDR-MM
- All required reference cords, interface adapters and launch cables
- Hard case to keep your test equipment safe and secure
The K41E is used by Cable Contractors. This kit provides Fiber Optic certification (Tier 1 & Tier 2). Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.
Test Adapters Added with Standard Components:
- Set of AD-SM-01E Singlemode Fiber Optic Adapters
- Set of AD-MM-01E Multimode Fiber Optic Adapters
- AD-OTDR-SM
- AD-OTDR-MM
- PROBE-FIBER-INSP
- All required reference cords, interface adapters and launch cables
- Extra-large wheeled hard case to keep your test equipment safe and secure
The K71E combines both cable certification and network connectivity testing. It is used by System Integrators, Network Owners or Cable Contractors looking to add new service offerings. This kit provides Copper and Fiber Optic certification (Tier 1 & Tier 2), PoE load testing, and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.
Test Adapters Added with Standard Components:
- Set of AD-CAT8.1-CH Channel Adapters
- Set of AD-CAT8.1-PL Permanent Link Adapters
- AD-6A-PCORD (for MPTL testing)
- Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
- Set of AD-SM-01E Singlemode Fiber Optic Adapters
- Set of AD-MM-01E Multimode Fiber Optic Adapters
- AD-OTDR-SM
- AD-OTDR-MM
- PROBE-FIBER-INSP
- All required reference cords, interface adapters and launch cables
- Extra-large wheeled hard case to keep your test equipment safe and secure
