TestPro Multifunction Cable Certifier
TRY IT, TEST IT, TRUST IT

TestPro is a purpose-built tester designed to ensure the modern Smart Building network infrastructure is fully qualified to support the demands of IoT connected devices.

CV100 Overview

The CV-100 platform has been improved with the new Enhanced range of testers, which has become the standard range. AEM has made several improvements based on customer feedback, such as a much-improved capacitive screen that is easier to use and navigate, as well as rugged permanent link adapters that are Cat8.1 compliant. Additionally, all other platforms now come with more equipment as standard, and fibre kits now come with an inspection microscope. The intelligent/smart building testers can also perform MPTL testing right out of the box, adding to the versatility of the product. These improvements have made the CV-100 platform an even more valuable tool for Network Cabling professionals.

The Testpro CV-100 is a cutting-edge copper and fibre cable certifier that will cater to all your cable certification needs and is the fastest tester currently available, saving you precious time on site. It not only certifies cables but also supports modern smart building network infrastructure and is fully equipped to handle the demands of IoT-connected devices. This versatile platform is a one-stop-shop for all your cable testing, network testing and certification needs.

Listen to what our customers think of AEM

Key Features
Certify twisted pair cable for CAT5e – CAT8 Level IIG
Certify Singlemode and Multimode fibre optic cable
Validate PoE
Qualify Multi-Gigabit link speed up to 10GigE
Validate Wired and Wireless Network Connectivity
Award winning testers
UK-based servicing and calibration
TestPro CV100 K50E
0

The K50E kit provides copper certification. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adaptor.

Test Adaptors Supplied as standard:

  • Set of AD-CAT8.1-CH Channel Adaptors
  • Set of AD-CAT8.1-PL Permanent Link Adaptors

TestPro CV100 K51E
0

The K51E kit provides both copper and fibre Optic certification. Wireless testing is supported and requires an additional Edimax EW-7822ULC Wi-Fi USB Adaptor.

Test Adaptors Supplied in addition to the K50E:

  • Set of AD-SM-01E SingleMode Fibre Optic Adaptors
  • Set of AD-MM-01E MultiMode Fibre Optic Adaptors
  • PROBE-FIBER-INSP (not pictured)
  • Interface adaptors and test reference cords to add SC testing. Kit now supports both SC and LC testing out of the box (extra interface adaptors and cords not pictured)

TestPro CV100 K60E
0

The K60E combines both copper cable certification and network connectivity testing. This kit provides Copper certification, PoE load testing and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adaptor.

Test Adaptors Supplied in addition to the K50E:

  • Set of AD-NET-CABLE Adaptors for PoE and Multi-Gigabit
  • AD-6A-PCORD (supports MPTL testing, not pictured)

TestPro CV100 K61E
0

The K61E combines both copper and fibre cable certification and network connectivity testing. It provides, PoE load testing and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adaptor.

Test Adaptors Supplied in addition to the K50E:

  • Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
  • Set of AD-SM-01E SingleMode Fibre Optic Adapters
  • Set of AD-MM-01E MultiMode Fibre Optic Adapters
  • AD-6A-PCORD (supports MPTL testing, not pictured)
  • PROBE-FIBER-INSP (not pictured)
  • Interface adaptors and test reference cords to add SC testing. Kit now supports both SC and LC testing out of the box (extra interface adaptors and cords not pictured)

TestPro OTDR K21E-MM
0

The K21E-MM is used by Cable Contractors. This kit provides Multimode OTDR Fiber Optic testing. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • D-OTDR-MM
  • All required reference cords, interface adapters and launch cables
  • Hard case to keep your test equipment safe and secure

TestPro OTDR K21E-SM
0

The K21E-SM is used by Cable Contractors. This kit provides Singlemode OTDR Fiber Optic testing. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • AD-OTDR-SM
  • All required reference cords, interface adapters and launch cables
  • Hard case to keep your test equipment safe and secure

TestPro OTDR K21E-QD
0

The K21E-QD is used by Cable Contractors. This kit provides Singlemode and Multimode OTDR Fiber Optic testing. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • AD-OTDR-SM
  • AD-OTDR-MM
  • All required reference cords, interface adapters and launch cables
  • Hard case to keep your test equipment safe and secure

TestPro CV100 OTDR K41E
0

The K41E is used by Cable Contractors. This kit provides Fiber Optic certification (Tier 1 & Tier 2). Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-SM-01E Singlemode Fiber Optic Adapters
  • Set of AD-MM-01E Multimode Fiber Optic Adapters
  • AD-OTDR-SM
  • AD-OTDR-MM
  • PROBE-FIBER-INSP
  • All required reference cords, interface adapters and launch cables
  • Extra-large wheeled hard case to keep your test equipment safe and secure

TestPro CV100 OTDR K71E
0

The K71E combines both cable certification and network connectivity testing. It is used by System Integrators, Network Owners or Cable Contractors looking to add new service offerings. This kit provides Copper and Fiber Optic certification (Tier 1 & Tier 2), PoE load testing, and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-CAT8.1-CH Channel Adapters
  • Set of AD-CAT8.1-PL Permanent Link Adapters
  • AD-6A-PCORD (for MPTL testing)
  • Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
  • Set of AD-SM-01E Singlemode Fiber Optic Adapters
  • Set of AD-MM-01E Multimode Fiber Optic Adapters
  • AD-OTDR-SM
  • AD-OTDR-MM
  • PROBE-FIBER-INSP
  • All required reference cords, interface adapters and launch cables
  • Extra-large wheeled hard case to keep your test equipment safe and secure